Skip to main content

How do I get set up in WoodFlow EUDR?

Until you're set up, the WoodFlow EUDR Home screen guides you through five steps, from your company documents to your first order.

When your organisation starts using WoodFlow EUDR, the Home screen is a guided setup called Get set up. It takes you through five steps: your company's documents, your suppliers and their forests, your EU buyers and their contacts, your products, and your first order and EUDR report (EUDR is the EU Deforestation Regulation). Once you are set up, Home opens on a dashboard of your orders instead.


Your first visit

On your first visit, the Home screen reads Welcome to WoodFlow, {organisation} with your organisation's name, and explains what WoodFlow EUDR is for. Five step cards sit side by side, one for each setup step. Each card has a Have ready section and a What it gives you section.

To begin your setup, click Start with company data. You can stop at any time and pick up where you left off, and you don't have to finish one step before starting the next.


The five setup steps

The Get set up home has five setup steps. Each step adds part of what your EUDR orders need:

Step

What you do there

What to have ready

Company data

Provide your own company's EUDR documents. You add each document once, and you can share it with your buyers on every order. Optional documents do not count towards your progress.

Your registration and licence documents, for example your CNPJ card (CNPJ is the Brazilian company registration number).

Suppliers and their forests

Add your suppliers and the forests you buy from, then provide the documents asked of them. Each forest needs a boundary, or its GPS point if it is 4 ha or less. Only a boundary lets its deforestation assessment run. Suppliers missing documents or boundaries are listed first.

Each supplier's business ID and the boundary files for their forests, for example the CAR file (CAR is Brazil's Rural Environmental Registry).

Buyers and their contacts

Add your EU buyers by their EORI or EU VAT number, then, if you like, the people at each buyer you send orders and reports to.

Each buyer's business ID, such as their EORI (Economic Operators Registration and Identification) number, and a contact.

Products and their species

Review the product templates WoodFlow EUDR has pre-loaded for you. This step is ticked from the start. Only create your own template for a product they don't cover.

Nothing: the product templates are already loaded.

Orders and EUDR reports

Create your first order whenever you're ready. You can create an order even if your setup isn't finished.

Your shipment documents, for example the invoice and bill of lading.


Work through the setup steps

While you are setting up, the Home screen is headed Get set up, with the line "Complete these steps to get your account ready for your first order." The steps are listed down the side. To work through the setup steps, click a step in that list and it opens beside the list.

  • The top of the list shows how many of the first four steps are in place, for example 2 of 4 in place. A step is ticked once it has something in it, for example your first company document.

  • Products and their species is ticked from the start, because WoodFlow EUDR's product templates are ready to use. It shows how many there are, for example "95 product templates you can use".

  • Orders and EUDR reports is not counted in the progress. It shows Whenever you're ready, because you can create an order at any time.

  • Anything still missing shows in a warning colour.

  • When a form is open in a step, its buttons sit in the panel's footer, in place of the button that moves on to the next step.

  • Lists show up to 10 rows, with a link such as View all 95 products when there are more.


Company data step

The Company data step lists the documents asked of your own company and your progress, for example 0 of 11 required provided. Optional documents do not count towards it.

  • Use the filters, each with a count, to narrow the list: All, Required, To provide and Provided.

  • The documents are in groups. Use Expand all or Collapse all to open or close every group.

  • Each document shows Document, Issued by, Valid until and Status. Where to get it explains what the document is and where to get it.

To provide a company document:

  1. Click Provide next to the document. A form titled Provide and the document's name opens in the step. Back returns you to the list.

  2. Check the Evidence ID. It is filled in for you: replace it with the document's own number.

  3. Guidance for users shows the document's description, where to get it and a link. Apply to Participant is already set to your own organisation.

  4. Set Valid from, which starts at today, and Valid to. +12 months and +36 months fill in the end date for you.

  5. Add any Evidence Notes and the details the form asks for, and upload the document under Supporting documents: a PDF, JPEG or PNG file of up to 20 MB.

  6. Click Add evidence, or Cancel to close the form without saving.

The document then shows Provided, its valid-until date and View, and the step is ticked.


Suppliers and their forests step

The Suppliers and their forests step holds the companies you buy timber from and the forests it comes from. Each forest needs a boundary for the deforestation check. Until you add a supplier, the step says You haven't added any suppliers yet.

  • Click Add supplier. The Add a supplier form opens in the step: start with the supplier's CNPJ, then add the forests you buy from.

  • Your suppliers are listed with Supplier, Business ID, Forests and Documents, for example "2 to provide". When every forest has a boundary, the step shows, for example, "1 supplier · every forest has a boundary".

  • Click View on a supplier to open its page in the step. It shows the supplier's progress, for example 0 of 2 required provided; its Company details, with View full details to open the full record; its Locations, each with its boundary status, and Add location to add another; and the documents asked of the supplier and of each forest, with the same filters and a Provide button for each document.

  • A forest without a boundary shows No boundary yet. Click Add boundary, upload a GeoJSON or JSON file, a KML file, a zipped shapefile, a zipped GeoJSON, or the CAR .zip from SICAR (SICAR is the national system where CAR files are downloaded), and click Save boundary. If a file is refused, the message says why.

  • If the forest is 4 ha or less and already has its GPS point, click It’s 4 ha or less in the same panel instead. The forest then shows GPS point is enough (4 ha or less). A forest located only by its GPS point gets no deforestation screening, which needs a boundary.

  • Company details shows one ID per line. After three IDs, a link such as Show 2 more shows the rest, and Show less hides them again.

For the Add a supplier form step by step, see How do I add a supplier and their forests?


Buyers and their contacts step

The Buyers and their contacts step holds your buyers and the contact details of their team, so you're ready to share export order details with them. Until you add a buyer, the step says You haven't added any buyers yet, and reminds you that you'll need their EORI or EU VAT number.

  • Click Add buyer. The Add a buyer form opens in the step: start with the buyer's EORI or EU VAT number, then, if you like, add their contacts.

  • Your buyers are listed with Buyer, Business ID and Country. Click View to see a buyer's company details.

For the Add a buyer form step by step, see How do I add an EU buyer?


Products and their species step

The Products and their species step lists the product templates you can use, with Product template, Scientific name, HS code and Shared by (HS is the Harmonized System of customs codes). WoodFlow EUDR's templates are already available on every order, so only create your own for a product they don't cover. If your products can't be read, the step shows "Your products could not be loaded" instead of asking you to add products.

To add your own product template:

  1. Click Add product. The Add a product form opens in the step.

  2. Name the product and give its HS Code, which is required, and its Scientific Name. The Species common name for EUDR is sent with the scientific name on EUDR statements. Use + Add Species to add another species.

  3. Click Save and Close.

Your new template is listed first, with your organisation under Shared by, and you can pick it on any order.


Orders and EUDR reports step

The Orders and EUDR reports step opens on Your first order. An order holds the shipment details, where the timber came from, and documents like the invoice and bill of lading, and the EUDR report is created from these. Until you create an order, the step says No orders yet. Click Add order whenever you're ready: you can create an order even if your setup isn't finished.


Come back to your setup

When you come back before your setup is finished, the Home screen reads Welcome back and opens on the step you were last on, with the message "You're on {step}. You can stop at any time and pick up where you left off."


When setup ends

Your setup ends when the first four steps are all in place, or when you create your first order, whichever comes first. When the last of the four is in place, for example when you add your first buyer and the list shows 4 of 4 in place, a banner says "You're set up. From now on, home opens on your dashboard." with a Go to dashboard link. The setup page stays open until you leave it. From then on, Home opens on the dashboard, which focuses on your orders.

Note: Not everyone sees Get set up. An exporter that has already sold at least one order opens straight on the dashboard. A company that only buys, for example one that orders are shared with, sees the buyer home instead. If WoodFlow EUDR can't tell whether your company sells or buys, Home first asks how it trades: choose We sell and click Set up as a seller to start Get set up. If your company was set up as a seller or a buyer when it was added to WoodFlow EUDR, Home opens straight on Get set up or on the buyer home, without asking.

If Get set up opened for a company that doesn't sell, you can step back out while nothing in it marks your company as an exporter (no order sold, no buyer and no supplier with a forest). A link sits beside Start with company data and under the list of steps: Only buying? Back to the buyer home for a company known to buy, or Not selling? Change how you trade for a new company. If something later marks your company as an exporter, Home goes back to the exporter home.

Note: Everything on the Home screen is also in the left menu: Ecosystem Registries, Product Traceability, Order Compliance, Evidence Tracking and Alerts. Pages also show a breadcrumb trail at the top, so you can step back to where you came from.

Did this answer your question?